AIDA Capture Lab

Logo

AIDA Capture Lab is a service of Automatisering Ingest Digitale Archieven (AIDA), operated by meemoo

Optical discs

Hardware

BluRay drive

A BluRay disc had some advantages over other optical disc drives. It’s compabible with almost all kinds of optical discs (source)

Model ASUS SBC-06D2X-U
Media CD-ROM
CD-R
CD-RW
DVD-ROM
DVD-R
DVD-RW
DVD+R
DVD+RW
Fujifilm Photodisc
Interface USB
Connector USB 2.0
Cable to check
Workstation connection Can be connected directly with write blocker
Power n/a USB power
Documentation  

Write blocker

Model Tableau Forensic USB 3.0 Bridge T8U blocker
Media Drives with USB (3.0 and older) connectors
Interface USB
Connector USB 3.0
Cable USB type B to USB type A
USB
Workstation connection Can be connected directly with workstation (which has a USB type A female connection
Power DC input: 5-pin Mini-DIN connector connector
Documentation  

Workstation

A Linux computer, preferably running the Bitcurator Environment (We use a Dell XPS)

Software

Guymager in the Bitcurator Environment

Workflow

Step 1: Connect the write blocker to the workstation

  1. Connect the write blocker to the workstation using the blue USB 3.0 cable (Host USB 3.0)
  2. Connect the DC power supply to the write blocker (bottom)
  3. Plug the power cable into a power socket
  4. Press the power button on the write blocker

Step 2: Connect the BluRay Drive to the write blocker

Connect the BluRay Drive to the write blocker using the USB cable (Device USB 3.0)

Step 3: Create a disk image

  1. Take an optical disc and insert it in the BluRay Drive
  2. Create a disk image using Guymager
  3. If Guymager can’t find the disc, remove the write blocker from the setup and directly connect the blu-ray drive to the workstation with the USB cable.

Step 5: Eject the disc

Eject the disc from the drive by pressing the button on the drive.